[2000LM Ultra-bright]Solar Lights Outdoor with Split Panel, 204LED Solar Security Lights with PIR Motion Sensor, 270°Wide Angle 3 Modes Solar Powered Garden Lights IP65 Wall Lights for Garden (4 Pack)

Upgraded Split Solar Motion Sensor Lights - Compact yet Powerful, Easy Installaiton, Widely Used, Energy saving, with 16ft Cable for Garage Garden...

Why Choose US?

This Pxwaxpy solar security light combines 2000LM ultra-bright 204LED lighting with a high-efficiency 30% conversion monocrystalline panel and 2200mAh battery for long-lasting dusk-to-dawn illumination. It features a flexible split-panel design with a 16.4ft cable, supporting both indoor and shaded outdoor installation, plus a 270° wide-angle pet-friendly PIR motion sensor detecting up to 26ft. With 3 smart lighting modes, IP65 waterproof all-weather durability, and 100% tool-free wiring-free installation, it delivers hassle-free, automatic, energy-saving security lighting ideal for yards, garages, patios and more.

Split Design for Both Outdoor & Indoor Use

Thanks to the innovative split design, the solar panel and light can be installed separately. Place the solar panel in direct sunlight for charging, while mounting the light indoors (like garages, sheds) or in shaded outdoor areas (porches, eaves) that lack sunlight. Enjoy flexible installation without sacrificing brightness.

• Installation Tips (marked on the image):

✔ Install the solar panel in a place with direct sunlight exposure

✔ Ensure the panel receives unobstructed sunlight for optimal charging

X Do not install the panel in areas blocked by strong shade or eaves

204LED Outdoor Solar Lights - 135° Rotatable Light Head

- The solar panel and the light body can be placed independently, connected by a 16.4ft cable, the light head and solar panel can be 135° adjusted to ensure maximum charging, which can be used both internally and externally.

Built-in Sensitive Light & PIR Sensors – 3 Customizable Modes

Our solar flood light comes with three practical modes to fit different needs:

• Mode 1: Strong Light Motion Sensor Mode

Turns on full brightness when motion is detected, and automatically shuts off after 20 seconds of inactivity.

(Highly energy-efficient; recommended for daily use to extend battery life.)

• Mode 2: Dim-to-Bright Motion Sensor Mode

Stays on low brightness at night, switches to full brightness when motion is detected, and returns to dim mode 20 seconds after the person leaves.

• Mode 3: Constant Low-Brightness Mode

Provides steady, low-level light from dusk to dawn (approx. 12 hours at 20% brightness) with the motion sensor disabled.

How to Select a Mode:

To test or switch modes during the day: Cover the solar panel to simulate darkness, then press the button on the back to cycle through the lighting modes.

Wide Lighting & Sensing Range

• This solar motion sensor light boasts an impressive 1623 sq.ft lighting coverage with a 270° wide-angle beam, brightening every corner of your garden, driveway or porch with crisp, uniform illumination.
• It features a highly sensitive motion sensor that detects movement within a 721 sq.ft detection area, making it an ideal solar security light for reliable dusk-to-dawn protection.

Choose a sunny location, then follow these steps for installation:

• Step 1: Use the wall anchors and screws to secure the solar panel bracket at your desired position, with the slot facing upwards.
• Step 2: Slide the solar panel into the bracket and adjust it to an optimal sun-facing angle.
• Step 3: Turn on the switch and set the outdoor solar light to your preferred lighting mode.
• Step 4: Slide the light unit into its bracket and adjust the angle as needed.
• Step 5: Connect the power cable and tighten the screws on the connector.
• Step 6: Installation is complete.

Where Can You Install the Solar Lights?

Ideal for Swimming Pool, Courtyard, Garage, Porch, Stairs, Fence, Patio, Backyard, Balcony, Shed, Driveway, Terrace etc.

• Optimized Notes & Warnings

1. The battery may be depleted after long-distance overseas shipping. Please fully charge the light under direct sunlight for 6–8 hours before first use.
2. This light is equipped with a light sensor and will not turn on during the daytime or in bright environments. It only activates automatically at night or in dark areas.
3. To test the lighting mode during the day: cover the solar panel with your hand and trigger the motion sensor to check the current mode.
4. If you need to use the light in the daytime, disconnect the cable between the solar panel and the lamp body.
5. Charging speed depends on sunlight intensity: faster under strong sunlight, slower or ineffective in weak light. The working duration at night depends on the amount of charge stored during the day.
6. Install the light in an open area away from shade from trees, buildings, or eaves. Keep the solar panel surface clean to ensure efficient light absorption.
7. In prolonged cloudy, rainy, snowy weather or extreme cold, the battery may not fully charge, resulting in shorter lighting time.
8. If the light fails to work after several cloudy days, charge it under direct sunlight for about 3 days to restore power.
9. To extend battery life, Mode 1 is recommended for daily use.
10. Do not disassemble the product, as this may damage its IP65 waterproof structure.